The Bespoke Object Revisited

The Bespoke Object Revisited

Progress Blog 
March 10th, 2025

I thought about the project two choice throughout the week. I do have an idea for the mass produced object, but I also have my object from project one that is still not quite up to my expectations. Basically what it comes down to is: At the end of the semester, would I rather have two sort of incomplete, rushed objects, or one refined one? So I'm going with the latter.

Bespoke Object V2!

So just as a reminder, this is where we're at right now: 

Digital Model:



Test Prints:





I keep having issues with removing support material and then the object breaks, so I would like to try a few more adjustments to maybe avoid that issues. I was also recommended to try tree supports so that's maybe something to investigate?

Some things I would like to change:

  • make the dots on the inner gallery thing bigger so that acrylic material an lock in
  • make clip less thick (just by a millimetre or two)
  • adjust removable wing mechanism so wing doesn't fall off clip

My initial plan for the butterfly clip was for the final object to be resin printed, so this extra time would give me some time to perfect the model before it is resin printed. I would finalize the dimensions this week, then get it resin printed next week. 

Finally, as this object is bespoke, I have measured it to fit my own head. A few extra weeks would give me time to complete the clip and do a photoshoot with it, as the original idea was to create something that I could use as a prop!




Comments

Post a Comment

Popular posts from this blog

Week Five & Six

Image
The Bespoke Object Progress Blog  Week Five & Six - February 24th, 2025 Last Monday, I did a test print of the butterfly clip and definitely discovered a lot. I guess there's a reason for test prints, right? The print went smoothly, although it took a really long time. The problem came when I removed the print and had to remove the support material. Long story short - I couldn't. There was absolutely no way to remove the material between the wings without cracking the structure.  This is the test print after I spent literally three hours trying to remove the support material, this was as much as I could remove. Small snippet of me struggling with this print ^^ I went to talk to Peter and he made a few recommendations. Because my plan is to have the final butterfly clip be resin printed, there are a few things that I have to take in to consideration. The resin printer prints an absolute minimum of about a millimetre, so he recommended that I make the wings thicker to a...
Read more

Progress Blog - April 7th

Image
  The Bespoke Object Progress Blog  April 7th, 2025 So, I didn't post last week because I haven't really had any big updates, but here's a run down on what I've been up to the past two weeks. We are at the resin printing stage in this process. I had one resin print done at the beginning of the week, but then I noticed something that I had to change so I had to send another file in, unfortunately. I made a small change right after my last FDM test before resin printing, which turned out to be a mistake. I increased the size of the little dots for my gallery to lock the acrylic into place, without accounting for the clearance that was needed for the size of the material. Of course, the intention was the have the butterfly clip completed and photographed before today, but due to the queue of people in front of me for resin printing, upon talking to Peter, the absolute earliest the print will be done (contingent on any failures that could occur) would be by mid-day on Monda...
Read more