Week Seven

 

The Bespoke Object

Progress Blog 
Week Seven - March 3rd, 2025

Okay so, I know today is the due date for this project, but unfortunately, my object is not quite done. I had every intention of completing it this week but had a few setbacks. 

First of all, for the laser cut pieces, I added a gallery to the bottom of each wing, so that the acrylic would stay and I wouldn't have to use glue. That was a relatively easy fix. The issues this week came with the printing. After adding the gallery and the little dots to the side of the skeleton, I found the support material even harder to remove than it has been. So much so that I completely broke one of my pieces, which is super disappointing.  My first laser cut trials ended up being too small, and then my laser cut appointment on Sunday was cancelled due to technical difficulties.



So basically, I have the completed prints of both detachable wings, but only one side of the clip, so I have to do another print this week. Initially, I had planned to have this printed in resin, but with all these setbacks, I think I'm just settling for an FDM print right now. 



Overall, I definitely underestimated how much time and work this object was going to take me. Hopefully I'm saying this for the last time, but I do plan to have this object finished by next Monday!

Comments

Post a Comment

Popular posts from this blog

Week Five & Six

Image
The Bespoke Object Progress Blog  Week Five & Six - February 24th, 2025 Last Monday, I did a test print of the butterfly clip and definitely discovered a lot. I guess there's a reason for test prints, right? The print went smoothly, although it took a really long time. The problem came when I removed the print and had to remove the support material. Long story short - I couldn't. There was absolutely no way to remove the material between the wings without cracking the structure.  This is the test print after I spent literally three hours trying to remove the support material, this was as much as I could remove. Small snippet of me struggling with this print ^^ I went to talk to Peter and he made a few recommendations. Because my plan is to have the final butterfly clip be resin printed, there are a few things that I have to take in to consideration. The resin printer prints an absolute minimum of about a millimetre, so he recommended that I make the wings thicker to a...
Read more

The Bespoke Object Revisited

Image
The Bespoke Object Revisited Progress Blog  March 10th, 2025 I thought about the project two choice throughout the week. I do have an idea for the mass produced object, but I also have my object from project one that is still not quite up to my expectations. Basically what it comes down to is: At the end of the semester, would I rather have two sort of incomplete, rushed objects, or one refined one? So I'm going with the latter. Bespoke Object V2! So just as a reminder, this is where we're at right now:  Digital Model: Test Prints: I keep having issues with removing support material and then the object breaks, so I would like to try a few more adjustments to maybe avoid that issues. I was also recommended to try tree supports so that's maybe something to investigate? Some things I would like to change: make the dots on the inner gallery thing bigger so that acrylic material an lock in make clip less thick (just by a millimetre or two) adjust removable wing mechanism so wi...
Read more

Progress Blog - April 7th

Image
  The Bespoke Object Progress Blog  April 7th, 2025 So, I didn't post last week because I haven't really had any big updates, but here's a run down on what I've been up to the past two weeks. We are at the resin printing stage in this process. I had one resin print done at the beginning of the week, but then I noticed something that I had to change so I had to send another file in, unfortunately. I made a small change right after my last FDM test before resin printing, which turned out to be a mistake. I increased the size of the little dots for my gallery to lock the acrylic into place, without accounting for the clearance that was needed for the size of the material. Of course, the intention was the have the butterfly clip completed and photographed before today, but due to the queue of people in front of me for resin printing, upon talking to Peter, the absolute earliest the print will be done (contingent on any failures that could occur) would be by mid-day on Monda...
Read more